DIY Detail Decontamination Kit

About the Product

🎉 Limited Time: Use code DIYDECON25 at checkout to get this kit for just $110.57

Deep Clean Your Paint the Right Way — Everything Included

Surface dirt is just the beginning. Beneath what a regular wash removes, your paint is holding onto iron fallout, water spot minerals, rail dust, brake dust, and road salt — all of it slowly degrading your finish and masking any protection you've applied. The DIY Detail Decontamination Kit gives you the full chemical and mechanical decontamination process in one complete package, safe for coated and uncoated surfaces.

Whether you're refreshing paint after winter, prepping for a ceramic coating, or just doing a proper deep clean for the first time, this kit has everything you need.

What's in the Kit

• DIY Detail Iron Remover — 16oz — Chemically dissolves embedded iron particles and brake dust on paint, wheels, and trim. Watch it bleed purple as it works.
• DIY Detail Water Spot Remover — 16oz — Safely dissolves mineral deposits left behind by hard water, rain, and road salt without damaging your clear coat.
• DIY Detail Incredible Suds Type 2 — 16oz — A high-lubricity shampoo for your contact wash step. Lifts surface dirt safely without stripping existing protection.
• DIY Detail Perforated Synthetic Decontamination Towel (Clay Towel) — The abrasive-free clay bar alternative. Quad-fold, use with proper lubrication and zero pressure to remove bonded surface contaminants without the risk of marring. Safe for coated surfaces.
• DIY Detail All Clean — 16oz (pre-diluted 15:1) — A versatile all-purpose cleaner ready to use on wheels, arches, door jambs, and engine bays.
• DIY Detail Soft Green Wheel and Body Brush — 8" — Gentle enough for painted surfaces, effective enough for wheels and tight spaces.
• DIY Detail Drying Blanket — Large, ultra-absorbent drying towel that pulls water off panels fast without scratching.
• DIY Detail Incredible Wash Mitt — Deep-pile wash mitt designed to trap dirt away from the paint surface during your contact wash.

The Decontamination Process

1. Pre-rinse the vehicle to remove loose dirt
2. Apply All Clean to wheels, arches, and heavily soiled areas — agitate with the wheel brush and rinse
3. Apply Iron Remover to paint and wheels — allow to dwell until it turns purple, then rinse thoroughly
4. Apply Water Spot Remover to affected panels — work in and rinse
5. Perform your contact wash using Incredible Suds and the Wash Mitt
6. Use the Clay Towel with a dedicated lubricant — glide across panels to remove bonded contaminants. Do not use the Clay Towel with Water Spot Remover.
7. Rinse and dry with the Drying Blanket

Why Decontaminate?

• Restores hydrophobic performance — contaminants block water beading on coated surfaces; decontamination brings it back
• Essential before coating — applying ceramic or wax over contaminated paint locks in the problem
• Safe for all finishes — chemicals and tools are formulated for coated and uncoated paint, glass, trim, and wheels
• Even new cars need it — rail dust and lot contamination affect vehicles before they ever reach you

*The DIY Detail Perforated Synthetic Decontamination Towel contains no abrasives. Always use with adequate lubrication, fold in fours, and apply no pressure. Do not use with DIY Detail Water Spot Remover.